Monitoring the pole position identification

If an error occurs during the pole position identification,

–

the procedure is stopped without the settings being changed.

–

the response set in 0x2C60 is effected.

Parameter

Address	Name / setting range / [default setting]		Information
0x2C60	PPI monitoring: Response – From version 04.00		Selection of the response triggered by the occurrence of an error during the pole position identification (PLI). Associated event ID: – 28961 \| 0x7121 - Fault - Pole position identification
	0	No response	Severity
	1	Warning
	2	Trouble
	3	Fault