Keypad
For the manual setpoint selection via keypad, the following default settings are used:
Parameter
|
Address
|
Name / setting range / [default setting]
|
Information
|
|
|
0x2601:003
(P202.03)
|
Keypad setpoints: Torque setpoint
(Keypad setpoints: Torque setp.)
-400.0 ... [100.0] ... 400.0 %
–
From version 03.00
|
Default setting of the keypad setpoint for the operating mode 0x6060 (P301.00) = "MS: Torque mode [-1]".
|
|
The increment for keypad setpoints can be adapted in 0x2862 (P701.00) by pressing a keypad arrow key once.
A switch-over to the keypad during operation is also possible as an alternative to the standard setpoint source setting.
Example: Change-over from AI1 setpoint to keypad setpoint